
| Brand | OONO |
|---|---|
| Manufacturer Part Number | F-1030 |
| Part Type | MODULE |
| Measurement System | IMPERIAL, METRIC |
| Maximum Switching Current | 8.0 |
| Contact Material | SILVER ALLOY |
| Contact Type | 1NO 1NC |
| Connector Type | SCREW |
| Coil Voltage | 5.0 |
| Style | DC 5V |
| Wattage | 40.0 |
| Model Number | F-1030 SERIES |
| Operation Mode | OFF |
| Mounting Type | SCREW MOUNT |
| UPC | 954525591557 |
| Package Dimensions Lxwxh | 3.66X2.2X1.42 INCHES |
| Weight | 0.15 POUNDS |
The Oono F-1030 DPST 1NO 8Amp Latching Relay Module is a versatile and reliable electronic switching solution designed for various applications where a 5V DC power source is available. This latching relay, specifically model F-1030, from Oono Technology comes with two normally open (NO) contacts and two normally closed (NC) contacts, making it a double-pole, single-throw (DPST) type.
Each contact can handle up to 8 Amperes of current, allowing the module to switch heavier loads compared to some other relays within its class. The latching mechanism ensures that the contacts remain in their last switched position until manually reset, providing stability and reliability for your system.
Powered by a 5V DC power supply, the Oono F-1030 module is compact and easy to integrate into various projects. It is designed with a robust, high-quality PCB board and a sturdy plastic housing, ensuring long-lasting performance even under heavy usage.
The F-1030 module is equipped with an LED indicator, which illuminates when the relay is engaged, making it easier to monitor the status of the switch. The module also features a quick-connect terminal block, allowing for easy wiring and installation.
This latching relay module is suitable for a wide range of applications, such as controlling motors, solenoids, lights, and other heavy electrical loads in automation systems, alarm systems, and other projects that require reliable and stable switching solutions.
To get started with the Oono F-1030 DPST 1NO 8Amp Latching Relay Module, simply connect the power supply and input voltage to the respective terminals, then wire your load to the appropriate contacts. Once the power is applied, the relay will switch, and the contacts will remain in their new position until manually reset. For additional safety, make sure to observe proper wiring and installation procedures to avoid any potential hazards.
The OONO F-1030 DPST 1NO 8AMP Latching Relay Module 5V is a type of electrical relay that can be used to switch electrical circuits. Here are some pros and cons of buying this specific relay module:
Pros:1. Latching Relay: This type of relay stays in the last position it was switched to until it is manually switched again. This can be useful in applications where you want to keep the circuit in a particular state until you manually change it.
2. DPST (Double Pole Single Throw) design: This means that the relay can switch two independent circuits with a single input. This can save space and simplify wiring in some applications.
3. 5V Operating Voltage: This relay can be operated using a 5V DC power supply, making it a good option for use with microcontrollers and other low-voltage systems.
4. 8 Amp Current Rating: This relay can handle up to 8 Amps of current, making it suitable for use with moderately-sized loads.
5. Compact Size: With dimensions of 30x38x14mm, this relay is relatively small and can be easily integrated into most projects.
Cons:1. Latching Relay: While the latching feature can be useful, it can also cause issues if not used carefully. For example, if the input signal is not clean, the relay may not switch to the desired state.
2. Only 1 NO (Normally Open) contact: This relay only has one normally open contact, meaning that it can only switch one circuit. If you need to switch multiple circuits, you may need to use multiple relay modules or a more complex relay design.
3. No Opto-Isolation: This relay does not have opto-isolation, which means that the input and output circuits are not electrically isolated from each other. This can lead to issues with noise and interference in some applications.
4. Manual Switching: Since this is a latching relay, it relies on manual switching to change states. This can be a disadvantage in applications where you want the relay to switch automatically based on some condition.
In conclusion, the OONO F-1030 DPST 1NO 8AMP Latching Relay Module 5V can be a useful addition to many electrical projects. Its latching feature, compact size, and ability to switch two circuits with a single input make it a versatile option. However, its lack of opto-isolation, manual switching, and limited number of normally open contacts may be disadvantages for some applications. Ultimately, whether or not this relay is the right choice for your project will depend on the specific requirements and constraints of your application. If you need to switch multiple circuits automatically, or if you require opto-isolation, you may want to consider other relay options. If, however, you have a relatively simple application that can benefit from the features of a latching relay, this module may be a good choice.
3, for sink/non output controller. Of course, you can also choose not to lock the screw. Two screw mounting holes are convenient for you to fix it on the wall or wood en board. Even if the power supply is turned off, status of output switch will not be affected in any way, it remain state before was off.
It can support both normally open and close. 2, this is a simple and practical latching relay module, which very convenient to use. 2, external set and reset button support momentary-action switch, but can't support self-holding switch. 3, support three input control modes: 1, use set and reset buttons on the module no external switch or signal is required.
Compact plastic case and wires connects for easy mount.
