DN40G6 TELEMECANIQUE Control Relay

Review TELEMECANIQUE Control Relay Ca2 New

The Telemecanique DN40G6 is a versatile control relay designed for various automation applications. It is part of Telemecanique's DN40 range, known for its compact size and high performance. This particular model, the CA2 version, is a 2-form C, 2-position, 6-ampere, normally open (NO) relay.

The DN40G6 CA2 relay features a robust and compact design, with dimensions of 72mm in length, 36mm in width, and 22mm in height. It is designed to withstand harsh industrial environments, with a protection degree of IP20, making it suitable for indoor use.

The relay contact rating is 6 amperes at 250 volts AC or 30 volts DC. It can handle a current up to 6A and can switch a maximum voltage of 250V AC or 30V DC. It is suitable for handling inductive loads, such as motors and solenoids, as well as resistive loads.

The DN40G6 CA2 relay comes with a built-in coil, which has a voltage requirement of 12V DC and a current requirement of 0.25A. It also has a contact resistance of less than 50 milliohms and a coil resistance of 45 ohms.

The relay is easy to install and integrate into automation systems, with a quick-connect terminal block that accepts wires up to 4mm in size. It also features a status LED that indicates the relay's operating status, making troubleshooting and fault finding easier.

The Telemecanique DN40G6 CA2 control relay is a reliable and efficient solution for various automation applications. Its compact size, high current handling capacity, and robust design make it a popular choice for industrial automation systems. It is easy to install and integrate, and its built-in status LED simplifies troubleshooting and fault finding.

Telemecanique DN40G6 control relay CA2 is an electromechanical device used for controlling electrical circuits. It is widely used in various industries for automation and control applications. Let's discuss some pros and cons of buying this relay.

1. Reliability: Telemecanique is a well-known brand in the automation industry, and its products are known for their reliability and durability. The DN40G6 control relay CA2 is no exception. It can handle heavy loads and operates efficiently under various environmental conditions.

2. Versatility: This relay is available in various configurations, including normally open (NO), normally closed (NC), and changeover (CO) contacts. It can be used to control a wide range of applications, from simple on/off control to complex sequential control.

3. Easy to install: The DN40G6 control relay CA2 is easy to install, and it comes with clear instructions and wiring diagrams. It can be mounted on a DIN rail, making it easy to install in a control panel.

4. Robust design: The relay has a robust design, with a protective cover that shields it from dust, water, and other contaminants. It can withstand harsh industrial environments, making it suitable for use in various industries.

1. Cost: The Telemecanique DN40G6 control relay CA2 is more expensive than some other relays in the market. However, its reliability and versatility justify its cost for many applications.

2. Limited programmability: This relay is not programmable, which means it cannot be reconfigured once it is set up. This can be a limitation for applications that require frequent changes to the control logic.

3. Limited communication options: The DN40G6 control relay CA2 does not have any built-in communication options, such as Modbus or PROFIBUS. It can only be used for local control applications.

The Telemecanique DN40G6 control relay CA2 is a reliable and versatile electromechanical device that can be used for various automation and control applications. Its robust design, ease of installation, and availability in various configurations make it a popular choice in many industries. However, its cost, limited programmability, and lack of communication options are some of its drawbacks. If you require a reliable and versatile relay for local control applications, the DN40G6 control relay CA2 is a good choice. However, if you need programmability or communication options, you may want to consider other relays or controllers.

If you are looking for a reliable and versatile control relay for local control applications, the Telemecanique DN40G6 control relay CA2 is a good choice. It can handle heavy loads and operate efficiently under various environmental conditions. However, if you require programmability or communication options, you may want to consider other relays or controllers that offer these features. It is essential to evaluate your specific application requirements and choose the right device for your needs.

Details:

Specifications:: ideal for maintaining reliability and performance in your electrical systems. Brand: Telemecanique. Stock #: igam1190051. Model: Telemecanique ca2 DN40G6 new relay available.

Model: ca2 DN40G6. Perfect for those seeking high-quality Telemecanique components. Overview:: type: relays.

specifications genpurrelays:

• brand: Telemecanique
• mpn: Dn40g6
• type: Relays

general genpurrelays:

• category: Business & Industrial > Electrical Equipment Supplies > General Purpose Relays

returns genpurrelays:

• paid by: seller
• time: 30 days
• policy: returns accepted
• method: money back

payments genpurrelays:

• credit card: diners-club
• other
• wallet: apple-pay

offer genpurrelays:

• best offers: true
• started: april 22, 2025
• availability: in stock
• sold #: 18
• options: ship-to-home
• in stock #: 5
• prices: $39.99–$51.00
• item condition:
  • New – Open box
  • Used
  • New

shipping genpurrelays:

• transit: 2-6 days
• type: calculated
• carrier: ups, usps
• service: ups ground, ups next day air, ups ground saver, usps ground advantage
• class: standard, one-day, economy

seller genpurrelays:

• # reviews: 151
• rating: 100.0%
• city: detroit, michigan