5Z948 DAYTON Solid Relay

Review DAYTON Solid State Relay 240vac Output 10a 3-32vdc Input New

The Dayton 5Z948 Solid State Relay is a versatile and reliable switching solution for various applications that require the control of an electrical load up to 10 amps at 240 volts AC. This solid state relay, also known as a opto-isolated relay or optocoupler, offers several advantages over traditional electromechanical relays.

This 240VAC relay features a 3-32VDC coil voltage range, making it suitable for a wide range of power sources. Its solid state design ensures reliable operation without the mechanical contacts that can wear out over time in traditional relays. This results in a longer lifespan and reduced maintenance requirements.

The Dayton 5Z948 is an opto-isolated relay, which means that the control and load circuits are separated optically, providing galvanic isolation. This feature is particularly useful in applications where electrical safety and noise reduction are essential, such as in industrial control systems, power supplies, and test equipment.

The relay has a compact size of 3.2 x 2.5 x 1.2 inches and a weight of only 0.2 pounds, making it easy to install in various applications. It can be mounted on a DIN rail or directly to a panel using the provided mounting holes. The relay also comes with a set of terminal screws for secure and easy wiring.

The relay's control input is optically isolated, allowing it to accept a wide range of control signals, including TTL, CMOS, and NPN/PNP transistors. It also features a built-in LED indicator that shows the status of the relay, making it easy to monitor the switch status in real-time.

The Dayton 5Z948 Solid State Relay is a high-performance and cost-effective solution for various applications that require the control of electrical loads. Its solid state design, opto-isolation, and versatile input voltage range make it a reliable and versatile switching component for industrial, laboratory, and test equipment applications.

The Dayton 5Z948 Solid State Relay (SSR) is a 240V AC input, 10A load capacity device with a 3-32V DC control voltage. Here are some pros and cons that might help you in deciding whether to purchase this SSR:

1. Solid State Technology: The Dayton 5Z948 uses solid state technology instead of mechanical contacts, making it more reliable and longer lasting than traditional relays.

2. Compact Size: It has a small form factor, which makes it easy to install in tight spaces.

3. Wide Operating Voltage Range: The 3-32V DC control voltage range allows for flexibility in designing control systems.

4. No Contact Bounce: Since there are no mechanical contacts, there is no contact bounce, which can result in cleaner and more precise control of the load.

5. Low Power Consumption: SSRs consume less power than traditional relays, which can result in energy savings.

1. Cost: SSRs generally cost more than traditional relays due to their advanced technology and features.

2. Complexity: SSRs may be more complex to install and configure than traditional relays due to the need for a separate control voltage source.

3. No Overload Protection: Unlike some traditional relays, the Dayton 5Z948 does not have built-in overload protection. This means that it is important to ensure that the load is not exceeding the rated capacity.

In conclusion, the Dayton 5Z948 Solid State Relay offers several advantages, including reliability, compact size, wide operating voltage range, no contact bounce, and low power consumption. However, it also has some disadvantages, such as higher cost, complexity, and lack of built-in overload protection.

If you require a reliable and long-lasting solution for controlling a 240V AC load, and you can accommodate the higher cost and complexity of an SSR, then the Dayton 5Z948 is a good choice. However, if you are working on a budget, or if you require built-in overload protection, then a traditional relay may be a better option. Ultimately, the decision depends on the specific requirements of your project.

Details:

These services include: ups 3 day select. Ups 2 day air am. Item is sold as pictured.

The cost of combined shipping depends on weight, location buyer and size box. Dayton 5Z948 solid state relay, 240vac output, 10a, 3-32vdc input. Ups next day am. Prices for these options may differ from standard ground shipping.

specifications genpurrelays:

• brand: Dayton
• mpn: 5z948

seller genpurrelays:

• rating: 99.8%
• # reviews: 22077
• city: kawkawlin, michigan

general genpurrelays:

• category: Business & Industrial > Electrical Equipment Supplies > General Purpose Relays

shipping genpurrelays:

• class: standard, expedited, one-day
• transit: 3-8 days
• service: usps ground advantage, ups ground, usps priority mail, ups next day air
• type: calculated
• carrier: usps, ups

offer genpurrelays:

• prices: $11.99–$25.26
• item condition:
  • New – Open box
  • Used
  • New
• options: ship-to-home
• in stock #: 5
• best offers: true
• sold #: 15
• availability: in stock
• started: june 25, 2025

payments genpurrelays:

• money order
• credit card: visa
• wallet: paypal
• other
• check

returns genpurrelays:

• policy: returns accepted
• paid by: buyer
• method: money back
• time: 30 days