2IO-16A POTTER BRUMFIELD Relay Board Module

Review POTTER BRUMFIELD And Relay Board Module Used

The Potter Brumfield 2IO-16A Relay Board OAC-5H IDC-5 is a versatile and powerful relay module designed for various automation and control applications. This board features 16 individually controlled 2-form-A SPST (Single Pole Single Throw) relays, each capable of handling up to 16 amperes and 250 volts AC or DC.

The relays on this board are opto-isolated, ensuring electrical isolation between the control and load sides, thereby preventing potential electrical hazards and providing greater reliability. The use of opto-isolated relays also allows for the control signal to be of any logic level, making the board compatible with various microcontrollers and automation systems.

The Potter Brumfield 2IO-16A Relay Board OAC-5H IDC-5 comes with a user-friendly design, featuring a compact size and clear labeling of each relay. The board measures 4.5 inches by 2.1 inches, making it easy to integrate into various projects. It also has a screw terminal block for easy wiring of the input and output connections.

The input side of the board has 16 NO (Normally Open) and 16 NC (Normally Closed) contacts, allowing for various control configurations. The output side has 16 common terminals, providing access to the normally open contacts when the corresponding relay is activated. The board also has a common terminal for the power supply, allowing for easy connection to the power source.

The Potter Brumfield 2IO-16A Relay Board OAC-5H IDC-5 is designed to operate over a wide temperature range of -20 C to 70 C, making it suitable for use in various environments. It also has a low power consumption, making it an energy-efficient solution for automation and control applications.

In summary, the Potter Brumfield 2IO-16A Relay Board OAC-5H IDC-5 is a high-performance and versatile relay module suitable for various automation and control applications. Its opto-isolated relays, wide temperature range, and user-friendly design make it a reliable and efficient solution for handling electrical loads up to 16 amperes and 250 volts AC or DC.

The Potter Brumfield 2IO-16A Relay Board OAC-5H IDC-5 is a 16-channel relay module that can be used to control heavy loads electrically using low voltage signals. Here are some pros and cons of buying this relay board:

1. Compact Size: This relay board is relatively small in size, making it ideal for projects where space is a constraint.

2. High Current Capacity: Each channel can handle a maximum current of 16A, making it suitable for controlling heavy loads.

3. Opto-Isolated Design: The opto-isolated design of this relay board ensures that the control circuit and the load circuit are electrically isolated, reducing the risk of electrical interference and damage.

4. Easy to Use: This relay board comes with a clear labeling of the pins and is easy to use for both beginners and advanced users.

5. Versatile: This relay board can be used in various applications, including home automation, industrial control systems, robotics, and more.

1. Limited Input Voltage: The maximum input voltage for this relay board is 24VDC, which may not be sufficient for certain applications.

2. Relay Contact Bounce: There may be some contact bounce when the relays are switched on or off, which can cause some noise or interference.

3. Lack of Protection Circuits: This relay board does not have any built-in protection circuits, such as overcurrent or overvoltage protection, which may require additional components for some applications.

The Potter Brumfield 2IO-16A Relay Board OAC-5H IDC-5 is a high-quality and versatile relay module that offers a good balance between features, performance, and cost. Its compact size, high current capacity, opto-isolated design, and easy-to-use interface make it an excellent choice for a wide range of applications. However, its limited input voltage and lack of protection circuits are potential drawbacks that should be considered before making a purchase.

If you are looking for a high-performance and compact relay module with a good current capacity and opto-isolation, then the Potter Brumfield 2IO-16A Relay Board OAC-5H IDC-5 is an excellent choice. However, if you require a higher input voltage or built-in protection circuits, then you may need to consider other options or add additional components to the design. Overall, this relay board is a great value for the price and is highly recommended for anyone looking to control heavy loads electrically.

Details:

Prices for these options may differ from standard ground shipping. These services include: ups 3 day select. These services include item is sold as pictured.

Used, missing one corner mounting leg, refer to pictures. Potter Brumfield 2IO-16A relay board w/ 11 OAC-5H 2 IDC-5 module. Ups 2 day air am. Ups next day am.

The cost of combined shipping depends on weight, location buyer and size box.

specifications genpurrelays:

• brand: Potter Brumfield
• mpn: 2io-16a
• part type: Board Module

general genpurrelays:

• category: Business & Industrial > Electrical Equipment Supplies > General Purpose Relays

seller genpurrelays:

• # reviews: 22036
• rating: 99.8%
• city: kawkawlin, michigan

payments genpurrelays:

• check
• credit card: diners-club
• other
• wallet: apple-pay
• money order

returns genpurrelays:

• paid by: buyer
• time: 30 days
• method: money back
• policy: returns accepted

offer genpurrelays:

• best offers: true
• availability: in stock
• sold #: 17
• started: june 18, 2025
• in stock #: 5
• prices: $99.99–$156.59
• item condition:
  • New
  • Used
• options: ship-to-home

shipping genpurrelays:

• type: calculated
• service: usps priority mail, ups ground, usps priority mail express, ups next day air
• class: expedited, standard, one-day
• transit: 6-12 days
• carrier: usps, ups